CABASSE SANTORIN 21 Specifications download pdf (Page 8)

e n g l i s h

SPECIFICATIONS & TECHNICAL DATA

SANTORIN 21M2

Band pass active subwoofer

Drive unit: ø 21 cm (8 in) - type 21MT3

Frequency bandwidth:

29 - 150 Hz in semi-reverberating chamber

Maximum RMS SPL: 108 dB

Maximum output power: 200 W

Peak power: 400 W

Lowpass cut-off frequency: 20 to 200 Hz

Phase switch: 0° normal - 180° reverse

Input: 2 low level - 2 high level

Voltage: 115 / 230 V AC - 50 / 60 Hz

Maximum power consumption: 200 W

Standby power consumtion:

0.4W @ 230VAC --- 0.4W @ 115VAC

Power consumption when off:

0W @ 230VAC --- 0W @ 115VAC

Useable temperature range: +5°C to +35°C

Storage temperature: -5°C to +40°C

Useable humidity range: 40% to 70%

Dimensions (h x w x d): 33 x 33 x 36 cm - 13 x 13 x 14 in

Weight: 11 kg - 24 lbs

SANTORIN 25M2

Active subwoofer

Drive unit: ø 25 cm (10 in) - type 25S20

Frequency bandwidth:

28-150 Hz in semi-reverberating chamber

Maximum RMS SPL: 111 dB

Maximum output power: 200 W

Peak power: 400 W

Lowpass cut-off frequency: 20 to 200 Hz

Phase switch: 0° normal - 180° reverse

Input: 2 low level - 2 high level

Voltage: 115 / 230 V AC - 50 / 60 Hz

Maximum power consumption: 200 W

Standby power consumtion:

0.4W @ 230VAC --- 0.4W @ 115VAC

Power consumption when off:

0W @ 230VAC --- 0W @ 115VAC

Useable temperature range: +5°C to +35°C

Storage temperature: -5°C to +40°C

Useable humidity range: 40% to 70%

Dimensions (h x w x d): 42 X 36 X 38 cm - 16.5 x 14 x 15 in

Weight: 16 kg - 35 lbs

Because of technical improvements already under way in our

constant search for optimum quality, Cabasse reserves the right

to modify all the models presented in speciﬁcation sheets, advertising

materials and manuals without prior notice.

Our web site www.cabasse.com will give you the speciﬁc adjustments

we recommend for the use of our active subwoofers.

Connections from the HI LEVEL OUTPUT

plugs

These outputs can be used to bring the signal to the main louds-

peaker systems or to a second subwoofer in a parallel mono conﬁ-

guration. In the last lay-out, the L (left) and R (right) HI LEVEL

OUTPUT

terminals must be connected to the L (left) and R

(right) HI LEVEL INPUT

ones of the second subwoofer. The

input signal must then arrive into the ﬁrst subwoofer by its L (left)

and R (right) HI LEVEL INPUT

terminals. The signal from the L

(left) and R (right) HI LEVEL OUTPUT

plugs is the one being

brought in by the HI LEVEL INPUT

connectors. These outputs

can thus be used to bring the signal to the main loudspeaker sys-

tems.

POWER SUPPLY

The AC IN

cord must be connected to the mains to supply the

subwoofer.

Switch POWER

on ON.

ADJUSTMENTS

LEVEL

For a ﬁrst volume adjustment, position the CROSSOVER FRE-

QUENCY

at around 180 Hz, and turn slowly the volume LE-

VEL

clockwise from minimum level up to a position where you

feel that the subwoofer sound level is appropriate. A check of the

level adjustment will be necessary after following steps.

CROSSOVER FREQUENCY

This potentiometer adjusts the cut-off frequency which deter-

mines the working bandwidth of the subwoofer. This adjustment

should be done according to the speciﬁcations of the main spea-

kers and the room acoustics. Choose the best frequency after

various listening tests.

PHASE

For a better sound integration of the subwoofer in the main system,

the PHASE

of the subwoofer might have to be inverted (180° posi-

tion), depending on the distance between the subwoofer and the main

speakers. You have to check the PHASE

each time you move your

speakers and each time you adjust the CROSSOVER FREQUENCY

Attention, if you use 2 subwoofers, both phase switches must be on the

same position.

WEEE MARK

Disposal of Wastes of Electrical & Electronic Equip-

ment (Applicable in the European Union)

This symbol on the product, consisting of the crossed-

out wheeled bin, indicates that this product shall not be

treated as household waste. Instead it shall be handed

over to the applicable collection point for the disposal

of electrical and electronic equipment at the end of life.

By ensuring this product is disposed of correctly, you

will help prevent potential negative consequences for the environment

and human health, which could otherwise be caused by inappropriate

waste handling of this product. The recycling of materials will help to

preserve natural resources. For more detailed information about recy-

cling of this product, please contact your local city ofﬁce, your house-

hold waste disposal service or the shop where you purchased the pro-

duct.

Attention

before operating the unit, be sure that the operating vol-

tage of your unit is identical with that of your local power

voltage. The selection of the right voltage 115 V - 230 V

is done with the selector 150 V - 230 V 2.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

Comments to this Manuals

No comments

CABASSE SANTORIN 21 Specifications Page 8

Comments to this Manuals

Related products and manuals for Soundbar speakers CABASSE SANTORIN 21