CABASSE MT31 JERSEY Specifications Page 11

  • Download
  • Add to my manuals
  • Print
  • Page
    / 16
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 10
Connections to speakers
0
plugs
These outputs can be used to bring the signal to the main
loudspeaker systems.
The signal from the L (left) and R (right) TO SPEAKERS
0
plugs is the one being brought in by the FROM RECEIVER
9
connectors. These outputs can thus be used to bring the si-
gnal to the main loudspeaker systems.
Power supply
The AC in
-
cord must be connected to the mains to supply
the subwoofer. The selection of the right voltage 115 V - 230 V
is done with 115 V - 230 V
=
. Switch POWER
q
, on STAND
BY or ON. With the switch on the STAND BY position, the
unit will mute after a few minutes without input signal. The
system turns on automatically when signal comes back.
Adjustments
VOLUME
w
For a first volume adjustment, position the CROSSO-
VER
e
at around 120 Hz, and turn slowly the VOLUME
w
clockwise from minimum level up to a position where you
feel that the subwoofer sound level is appropriate. A check
of the level adjustment will be necessary after following
steps.
CROSSOVER
e
This potentiometer adjusts the cut-off frequency which
determines the working bandwidth of the subwoofer. This
adjustment should be done according to the specifications
of the main speakers and the room acoustics. Choose the
best frequency after various listening tests.
PHASE
r
For a better sound integration of the subwoofer in the main
system, the PHASE
r
of the subwoofer might have to
be inverted (180° position), depending on the distance
between the subwoofer and the main speakers. You have to
check the PHASE
r
each time you move your speakers and
each time you adjust the CROSSOVER
e
.
Attention, if you use 2 subwoofers, both phase switches
must be on the same position.
Our web site www.cabasse.com will give you the speci-
fic adjustments we recommend for the use of our active
subwoofers.
MAINTENANCE
The MT31 cabinets are made of medium density fiber panels,
protected by synthetically veneer with two coats of varnish and
a special anti-scratch film. This hi-tech veneer does not require
any specific care. Use a wet cotton waste for cleaning, or any
cleaning device for wood or plastic.
WEEE MARK
Disposal of Wastes of Electrical &
Electronic Equipment (Applicable
in the European Union)
This symbol on the product, consisting of the crossed-out wheeled
bin, indicates that this product shall not be treated as household
waste. Instead it shall be handed over to the applicable collection
point for the disposal of electrical and electronic equipment at the
end of life.
By ensuring this product is disposed of correctly, you will help prevent
potential negative consequences for the environment and human
health, which could otherwise be caused by inappropriate waste han-
dling of this product. The recycling of materials will help to preserve
natural resources. For more detailed information about recycling of
this product, please contact your local city office, your household
waste disposal service or the shop where you purchased the product.
MT31 Position Ways Drivers complement Sensivity Cross-over Frequency Nominal Minimum Power Peak Standard Dimensions Weight
1W/1m points response impedance impedance handling power finish h x w x d (cm) (kg)
(dB) (Hz) (Hz) (ohms) (ohms) (Watt) (Watt) h x w x d (”) (lbs)
ANTIGUA in wall 2 1 x Tweeter DOM 36 88 1,800 53-22,400 8 6.8 40 320 paintable 32 x 23 x 8,8 2.2
in wall 1 x 17 cm 17T20 IW white 12.6 x 9.1 x 3.5 in 4.9 lbs
ANTIGUA bookshelf/ 2 1 x Tweeter DOM 37 89 2,800 60-23,000 8 4.3 75 550 Wenge / black front grill 41 x 22 x 30 9
main speaker stand 1 x 17 cm 17TN15 Maple / black front grill 16.1 x 8.7 x 11.8 in 20 lbs
TOBAGO floorstanding 2 1 x Tweeter DOM 37
87 2,550 55-23,000 8 4.6 85 600 Wenge / black front grill 96 x 22 x 32 17
main speaker 2 x 13 cm 13TN15 Maple / black front grill
37.8 x 8.7 x 12.6 in 37 lbs
JERSEY floorstanding 2 1 x Tweeter DOM 37 90 2,300 58-23,000 8 4.4 100 700 Wenge / black front grill 100 x 22 x 32 18
main speaker 2 x 17 cm 17TN15 Maple / black front grill 39.4 x 8.7 x 12.6 in 40 lbs
SOCOA on/under 2 1 x Tweeter DOM 37
88 3,000 64-23,000 8 4.5 85 600 Wenge / black front grill 16 x 47 x 37 10
center screen 2 x 13 cm 13TN15 Maple / black front grill 6.3 x 18.5 x 14.6 in 22 lbs
ALDERNEY floorstanding 3 1 x Tweeter DOM 37
90 850-3,400 59-23,000 8 3.5 110 770 Wenge / black front grill 109 x 23 x 35 23
main speaker 1 x 13 cm 13TN15 Maple / black front grill 42.9 x 9 x 13.8 in 51 lbs
2 x 17 cm 17TN15
ORION floorstanding 1 1 x 21 cm 21MT3 active adjustable 35-200 active active 250 750 Wenge
42 x 30 x 43 17
active subwoofer 30-180 Maple
16.5 x 11.8 x 16.9 in
37 lbs
Because of technical improvements already under way in our constant search for optimum quality,
Cabasse reserves the right to modify all the models presented in specification sheets, advertising materials and manuals without prior notice.
ACTIVE SUBWOOFER ORION MT31
Pulsed sound pressure 114 dB
Phase switch normal
180° reverse
In put 2 low level - 2 hight level
Voltage 115 / 230 V AC-50 / 60 Hz
Maximum power consumption 165W
Standby power consumtion 0.49W @ 230VAC
0.5W @ 115VAC
Power consumption when off 0.04W @ 230VAC
0.04W @ 115VAC
Useable temperature range +5°C to +35°C
Storage temperature -5°C to +40°C
Useable humidity range 40% to 70%
Page view 10
1 2 ... 6 7 8 9 10 11 12 13 14 15 16

Comments to this Manuals

No comments